Skip to main content Accessibility help
×
Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T11:16:39.355Z Has data issue: false hasContentIssue false

5 - Switch-mode mm-wave silicon power amplifiers

Published online by Cambridge University Press:  05 April 2016

Harish Krishnaswamy
Affiliation:
Columbia University
Hossein Hashemi
Affiliation:
University of Southern California
Anandaroop Chakrabarti
Affiliation:
Columbia University
Kunal Datta
Affiliation:
University of Southern California
Hossein Hashemi
Affiliation:
University of Southern California
Sanjay Raman
Affiliation:
Virginia Polytechnic Institute and State University
Get access

Summary

Introduction to switching power amplifiers

Switch-mode power amplifiers (PAs) are motivated by the insight that power-amplifier efficiency is maximized by minimizing the amount of overlap between device current and device voltage. In other words, it is desirable to minimize the amount of time spent by the device supporting a non-zero current and non-zero voltage simultaneously. Switch-mode power amplifiers accomplish this by employing the active device as a switch that transitions between two states – an ON state, where the resistance of the device is ideally zero and in practice small compared with the other impedances in the circuit, and an OFF state, where the resistance of the device is ideally infinite and in practice high compared with the other circuit impedances. Consequently, the active device forces the current and voltage waveforms to be non-overlapping – during the ON state, the switch supports non-zero current but the voltage across it is close to zero, and during the OFF state, the switch supports non-zero voltage but the current through it is zero. Under idealized conditions, 100% efficiency can be achieved assuming switching losses are eliminated. This typically requires the voltage across the switch to be shaped to zero at the end of the OFF state as the switch is turning ON, so that the switch is not turned ON with non-zero charge stored on its output capacitance. Assuming such a “zero-voltage switching” (ZVS) condition is met, 100% efficiency can be achieved, unlike for current-source-based power amplifiers, where 100% efficiency can be achieved only in class-C operation as the output power approaches zero or by using class-F tuning, where 100% efficiency is achieved asymptotically with infinite harmonic tuning. In practice, however, the efficiency is limited by parasitic effects, such as conduction loss in the non-zero switch resistance and loss in the passive output matching network.

Switch-mode power amplifiers are distinct from their current-source counterparts (Fig. 5.1) in that they are (at least partially) voltage-forcing amplifiers. During the ON portion of the RF cycle, the device voltage is forced to ground through the switch, and during the OFF portion, the voltage is determined either by the load network or perhaps by the presence of a complementary switch (as is the case in inverter-like class-D power amplifiers).

Information

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Book purchase

Temporarily unavailable

Save book to Kindle

To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×