Skip to main content Accessibility help
×
Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T15:09:30.108Z Has data issue: false hasContentIssue false

Chapter 11 - Coiled Springs

Published online by Cambridge University Press:  03 June 2025

T. D. Gunneswara Rao
Affiliation:
National Institute of Technology, India
Mudimby Andal
Affiliation:
Kakatiya Institute of Technology and Science, Warangal, India
Get access

Summary

11.1 INTRODUCTION

Springs are the structural elements used to absorb energy or impact. Energy absorption in these elements is due to their ability to deform. Members deform more under loads and absorb more energy. For example, a body falling on a sand heap receives less impact as the falling body moves the sand particles, thereby dissipating energy. If the same body falls on a concrete fl oor, the body receives more impact and very less energy is dissipated. Here, concrete fl oor could not absorb the energy as the particles of concrete are bound together, whereas in case of sand, particles are not bound together allowing energy dissipation. Thus, energy absorbing elements should be capable of deforming without getting ruptured. Coiled springs are the best examples for the energy absorption. Coil springs are of two types:

  • 1. Close-coiled helical springs

  • 2. Open-coiled helical springs.

In case of a close-coiled helical spring, the pitch (distance between two coils) is very less and angle of helix is zero.

In case of open-coiled helical springs, the gap between the coils (pitch) is considerable and the angle of helix is also fi nite value. The components of helical spring are

d = wire diameter

D = 2R = diameter of the coil

R = mean radius of the coil

n = number of turns/coils present in the spring.

11.2 EXPRESSION FOR THE EXTENSION OF A CLOSE-COILED HELICAL SPRING

Consider a close-coiled helical spring subjected to axial load.

The load ‘W’ passes through the center of coil.

The axial load W is transformed on to the cross-section of the coil. Shear force acting on the wire is W, twisting moment acting on the wire T = WR. Compared to wire diameter the radius of the coil is generally high (R > d).

Thus, the shear stress due to twisting moment (WR) is considerable.

The maximum shear stress in the wire of the coil.

Information

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Book purchase

Temporarily unavailable

Save book to Kindle

To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×