Published online by Cambridge University Press: 03 June 2025
14.1 INTRODUCTION
The fl exure formula derived in the theory of simple bending assumes that the loading plane should pass through the axis of symmetry. This condition is not satisfi ed in some cases where the loading is gravity loading and the member rests on an inclined support such as purlins of a truss. In some cases, the cross-section may not have axis of symmetry such as angular sections. This chapter provides the solution for such problems where bending is referred as unsymmetrical bending.
14.2 UNSYMMETRICAL BENDING
If the plane of loading of a beam does not coincide with one of the principal axes of the crosssection, then the resulting bending is termed as unsymmetrical bending. Unsymmetrical bending may occur in two ways.
1. The section is symmetrical about two axes like I section, rectangular section, and circular section but the loading plane is inclined to both the principal axes.
2. The section itself is unsymmetrical like angle section or a channel.
The following examples illustrate unsymmetrical bending.
14.3 PRINCIPAL MOMENT OF INERTIA
Let us consider an arbitrary cross-section. The centroid of the cross-section is taken as the origin of coordinate axes system. Consider an elemental area δA at point P(x,y).
P(x,y) are coordinates of the elemental area about axes X and Y passing through the centroid of the cross-section.
Let the coordinate axes X and Y be rotated and be defi ned by the angle θ.
Then, the coordinates of the elemental area δA is given by transformation matrix.
Product of inertia may be positive or negative and it is zero if any one of the x or y axis is the axis of symmetry of the cross-section. A detailed calculation of the same is presented in the next coming topics of this chapter.
Principal axes are the axes about which the product of inertia of the cross-section is zero.
Hence for principal axes product of inertia IX'Y' be equated to zero. Let α be the angle that defi nes the principal axes.
To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.