Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T07:19:28.802Z Has data issue: false hasContentIssue false

Geometrical method to determine the reciprocal screws and applications to parallel manipulators

Published online by Cambridge University Press:  03 April 2009

Jianguo Zhao
Affiliation:
Department of Electrical and Computer Engineering, Michigan State University, MI 48824, USA
Bing Li*
Affiliation:
Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, P.R. ChinaState Key Laboratory of Robotics and System (HIT), Harbin 150001, P.R. China
Xiaojun Yang
Affiliation:
Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, P.R. China
Hongjian Yu
Affiliation:
Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, P.R. China
*
*Corresponding author. E-mail: libing.sgs@hit.edu.cn
Rights & Permissions [Opens in a new window]

Summary

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the 'Save PDF' action button.

Screw theory has demonstrated its wide applications in robot kinematics and statics. We aim to propose an intuitive geometrical approach to obtain the reciprocal screws for a given screw system. Compared with the traditional Plücker coordinate method, the new approach is free from algebraic manipulation and can be used to obtain the reciprocal screws just by inspecting the structure of manipulator. The approach is based on three observations that describe the geometrical relation for zero pitch screw and infinite pitch screw. Based on the observations, the reciprocal screw systems of several common kinematic elements are analyzed, including usual kinematic pairs and chains. We also demonstrate usefulness of the geometrical approach by a variety of applications in mobility analysis, Jacobian formulation, and singularity analysis for parallel manipulator. This new approach can facilitate the parallel manipulator design process and provide sufficient insights for existing manipulators.

Information

Type
Article
Copyright
Copyright © Cambridge University Press 2009