Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T05:23:12.096Z Has data issue: false hasContentIssue false

The effect of Dean, Reynolds and Womersley numbers on the flow in a spherical cavity on a curved round pipe. Part 1. Fluid mechanics in the cavity as a canonical flow representing intracranial aneurysms

Published online by Cambridge University Press:  31 March 2021

Fanette Chassagne*
Affiliation:
Department of Mechanical Engineering, University of Washington, Seattle, WA 98105, USA
Michael C. Barbour
Affiliation:
Department of Mechanical Engineering, University of Washington, Seattle, WA 98105, USA
Venkat K. Chivukula
Affiliation:
Biomedical and Chemical Engineering and Sciences, Florida Institute of Technology, Melbourne, FL 32901, USA
Nathanael Machicoane
Affiliation:
University Grenoble Alpes, CNRS, Grenoble-INP, LEGI, 38000 Grenoble, France
Louis J. Kim
Affiliation:
Department of Neurological Surgery, University of Washington, Seattle, WA 98107, USADepartment of Radiology, University of Washington, Seattle, WA 98107, USA
Michael R. Levitt
Affiliation:
Department of Mechanical Engineering, University of Washington, Seattle, WA 98105, USADepartment of Neurological Surgery, University of Washington, Seattle, WA 98107, USADepartment of Radiology, University of Washington, Seattle, WA 98107, USA
Alberto Aliseda
Affiliation:
Department of Mechanical Engineering, University of Washington, Seattle, WA 98105, USADepartment of Neurological Surgery, University of Washington, Seattle, WA 98107, USA
*
†Email address for correspondence: fchassag@u.washington.edu

Abstract

Flow in sidewall cerebral aneurysms can be ideally modelled as the combination of flow over a spherical cavity and flow in a curved circular pipe, two canonical flows. Flow in a curved pipe is known to depend on the Dean number $De$, combining the effects of Reynolds number $\textit {Re}$ and of the curvature along the pipe centreline, $\kappa$. Pulsatility in the flow introduces a dependence on the Womersley number $Wo$. Using stereo particle image velocimetry measurements, this study investigated the effect of these three key non-dimensional parameters, by modifying pipe curvature ($De$), flow rate ($Re$) and pulsatility frequency ($Wo$), on the flow patterns in a spherical cavity. A single counter-rotating vortex was observed in the cavity for all values of pipe curvature $\kappa$ and Reynolds number $\textit {Re}$, for both steady and pulsatile inflow conditions. Increasing the pipe curvature impacted the flow patterns in both the pipe and the cavity, by shifting the velocity profile towards the cavity opening and increasing the flow rate in to the cavity. The circulation in the cavity was found to collapse well with only the Dean number, for both steady and pulsatile inflows. For pulsatile inflow, the counter-rotating vortex was unstable and the location of its centre over time was impacted by the curvature of the pipe, as well as $\textit {Re}$ and $Wo$ in the free stream. The circulation in the cavity was higher for steady inflow than for the equivalent average Reynolds number and Dean number pulsatile inflow, with very limited impact of the Womersley number in the range studied. A second part of this study, that focuses on the changes in fluid dynamics when the intracranial aneurysm is treated with a flow-diverting stent, can be found in this issue (Barbour et al., J. Fluid Mech., vol. 915, 2021, A124).

Information

Type
JFM Papers
Copyright
© The Author(s), 2021. Published by Cambridge University Press
Figure 0

Figure 1.Sketch of the curved pipe with a spherical cavity, with the key geometrical parameters used to define the study and the four different models with varying centreline curvatures ($\kappa = 0,0.0625,\ 0.14$ and $0.22\ \textrm {mm}^{-1}$).

Figure 1

Figure 2.Schematic of the experimental configuration.

Figure 2

Figure 3.Velocity fields in the cavity in the plane of symmetry of the aneurysm geometry (highlighted in red in the schematic of the aneurysm geometry). The colours represent the magnitude of the out-of-plane velocity and the vectors represent the in-plane velocity. The vectors’ grey intensity is proportional to the in-plane velocity magnitude. Columns from left to right correspond to increasing free-stream curvature $\kappa$ and the rows from top to bottom correspond to increasing inflow $Q_{pipe}$ (i.e. increasing Re).

Figure 3

Figure 4.Free-stream velocity (in the parent vessel, highlighted in red on the aneurysm schematic) for different pipe curvatures and inflow rates. The colours represent the velocity magnitude, and the arrows represent the direction of the in-plane velocity (columns, from left to right) corresponding to increasing pipe curvature $\kappa$ (Dean number increases diagonally from top left to bottom right) and (rows, from top to bottom) corresponding to increasing Reynolds number (inflow rate, $Q_{pipe}$).

Figure 4

Figure 5.Location of the centre of the vortex for the different $\textit {Re}$ and $De$ (curvature of the pipe) numbers.

Figure 5

Figure 6.Velocity at the opening of the cavity (highlighted in red in the aneurysm schematic). The lines are coloured as a function of $\boldsymbol {u} \boldsymbol {\cdot } \boldsymbol {n}$, blue meaning that the flow is exiting the cavity ($\boldsymbol {u} \boldsymbol {\cdot } \boldsymbol {n} < 0$) and red meaning that the flow is entering through the opening ($\boldsymbol {u} \boldsymbol {\cdot } \boldsymbol {n} > 0$).

Figure 6

Figure 7.(a) Velocity of the flow entering the cavity as a function of the flow rate in the pipe for the four different curvatures. (b) Reynolds number $\textit {Re}$ at the opening of the cavity as a function of $De$.

Figure 7

Figure 8.Circulation in the cavity ($Wo = 2.5$) over the cycle for four different $\textit {Re}$ in the curved pipe ($\kappa = 0.063 \ \textrm {mm}^{-1}$).

Figure 8

Figure 9.Velocity field in the cavity at four points of the cycle for $\textit {Re} = 240, Wo = 2.5$ and $\kappa = 0.063\ \textrm {mm}^{-1}$.

Figure 9

Figure 10.Location of the centre of the vortex in the spherical cavity for a pulsatile flow in the pipe: A, $Re = 240, Wo = 2.5, \kappa = 0.063 \ \textrm {mm}^{-1}$; B, $Re = 480, Wo = 2.5, \kappa = 0.063 \ \textrm {mm}^{-1}$; C, $Re = 480, Wo = 2.5, \kappa = 0.22 \ \textrm {mm}^{-1}$; and D, $Re = 240, Wo = 3.2, \kappa = 0.063 \ \textrm {mm}^{-1}$.

Figure 10

Figure 11.Plots of (a) $\textit {Re}$ in the cavity as a function of $\textit {Re}$ in the curved pipe, and (b) circulation in the cavity as a function of $De$.

Figure 11

Figure 12.Circulation $\varGamma$ averaged over the cycle for the three Womersley numbers $Wo = 0, 2.6$ and $3.6$ as a function of $De$.

Figure 12

Figure 13.Area covered by the motion of the centre of the vortex across the cycle as a function of $\textit {Re}_{pipe}$.