Fiber bending is a common and practical method to suppress transverse mode instability (TMI) in high-power fiber lasers. Tight bending and loose bending are respectively applicable to fiber lasers with different mode characteristics for TMI suppression. This study analyzes the applicability of the two approaches in conventional and low-numerical aperture (NA) fibers, finding that compared to conventional large-core fibers that predominantly use loose bending to improve TMI threshold, low-NA fibers have the potential to utilize both methods for TMI suppression, although their effectiveness differs significantly. Simulation results reveal that large-core low-NA fibers exhibit a more pronounced effect on TMI suppression by tight bending and there exists an optimal bending range for the maximum TMI threshold. Guided by these findings, a low-NA Yb-doped fiber with core/cladding diameters of 35/250 μm was fabricated and experiments were subsequently conducted. By optimizing bending, an 8-kW single-mode output tandem-pumping fiber amplifier is obtained.