To save content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about saving content to .
To save content items to your Kindle, first ensure no-reply@cambridge.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Livestock manure is a major source of agricultural air ammonia (NH3) emissions that pose significant environmental and health concerns, particularly in intensive livestock housing systems. This experiment investigated the effects of temperature and manure urea concentration on NH3 production from simulated cattle manure using an in-vitro microchamber system. Fresh cattle faeces were combined with simulated urine containing varying urea concentrations (0, 5, 12.5, 20 g urea-N/L) to produce simulated manure with concentrations of 0, 2.4, 6.0 and 9.6 g urea/kg. A 4 × 3 factorial randomized block design tested four urea treatments at three temperatures (25, 30 and 35 °C), with matched air and manure temperatures, using microchambers with controlled airflow. Ammonia concentrations were measured over 90 min using acid traps and colorimetric analysis and NH3 production rates were calculated from these. Both temperature and urea concentration increased NH3 production rates, with a significant interaction between urea concentration and temperature (P < 0.001). Relative to 25 °C, temperatures of 30 and 35 °C substantially increased NH3 production rates across all urea concentrations, with estimated increases of 3.9 to 5.2 and 7.5 to 10.0 mg NH3/m2/min, respectively. At 25 °C, NH3 production was similar across all urea amended treatments, whereas at 30 and 35 °C production increased from 2.4 to 6.0 g urea/kg manure, but showed little additional increase at 9.6 g urea/kg manure. Adding urea immediately increased manure pH (by approximately 1.2 units) and also increased final pH values. Temperature exerted a greater influence on NH3 production than urea concentration within the range tested.
Nitrogen (N) is a major plant nutrient, and its supply is very often limiting growth. The main forms of inorganic N in soil supplying plants are ammonium and nitrate ions. Although the soil availability of N can vary greatly, the cytoplasmic nutrient ion activities in a typical plant cell are maintained at set points that are independent of changes in supply. By contrast, the storage of N as protein and vacuolar nitrate depends on the external supply. Measurements of cellular homeostasis of ammonium and nitrate are limited by methodology. The upper limits for cytoplasmic set points are likely to depend on toxicity, and for ammonium this is well known but less clear for nitrate. An intracellular set point for N must be maintained by membrane transport systems and assimilation processes. Crop N use efficiency has uptake and assimilation components, and understanding homeostasis is fundamentally important for improving this important trait.
This review paper presents in more detail the key points of the Brindley Award lecture given at the 61st Annual Meeting of The Clay Minerals Society and 5th Asian Clay Conference in Honolulu in June 2024. It is focused on the research of the author, even though it credits earlier findings. The paper discusses first the definition of illite, its position in mineral classification, the distinction between illite and true micas, the illite crystal-growth mechanism, and the specific properties of illite, resulting from its small crystal size. Second, this review presents evidence and explanation for the exceptional abundance of this mineral on Earth’s surface. Third, the behavior of illite in the rock cycle is characterized: in weathering, in sedimentation, and in diagenetic, metamorphic, and hydrothermal environments. Finally, the exceptional role of illite in geochemical cycling of water and elements K, N, B, Rb, and Cs is presented.
The major essential nutrients, nitrogen and phosphorus, limit primary productivity in many aquatic environments, though in some areas of the ocean (high nutrient low chlorophyll), productivity is limited by the availability of iron or iron and manganese. Planktonic cyanobacteria are major nitrogen fixers in marine and fresh waters; heterocystous cyanobacteria are common in fresh waters and occur as symbionts in marine diatoms. Non-heterocystous marine cyanobacteria occur free-living and as algal symbionts. Nitrogen fixation requires iron and molybdenum, which can be less commonly replaced by vanadium, as well as reductants and ATP. For combined nitrogen, the form assimilated into organic nitrogen is, as for diazotrophs, ammonium, which is taken up by specific transporters. Nitrate influx also involves an energised transporter. Nitrate reductase requires catalytic iron and molybdenum and reductant to produce nitrite; nitrite is reduced to ammonium by nitrite reductase using catalytic iron. Several forms of organic nitrogen can also be taken up and assimilated by algae. Phosphorus is taken up as inorganic phosphate; organic phosphate from the medium is hydrolysed by phosphatases secreted by algae. Aquatic rhizophytic macrophytes with rhizoids or roots in fine-grained substrates acquire various fractions of combined nitrogen and of phosphate from the sediment and from overlying water.
Leaching and volatilization of N from urea, and precipitation and fixing of Zn by commercial fertilizers, has led to excessive costs for farmers and problems for the environment. Incorporating fertilizers in a porous material such as diatomite can prevent these losses by slowing the nutrient release. A new fertilizer formulation, based on the urea-zinc (UZn) complex in the eutectic solution of salt-urea was prepared. In the following, UZn was incorporated into diatomite and nano-diatomite by using hydroxypropyl methylcellulose (HPMC) as a binder. The treatments included the following: U: urea; UZn: urea-Zn; UZn-D: urea-Zn-diatomite; UZn-ND: urea-Zn-nano-diatomite; UZn-D-B: urea-Zn-diatomite-binder; and UZn-ND-B: urea-Zn-nano-diatomite-binder. The slow-release urea fertilizers (SRUFs) were characterized using FESEM/EDS, FTIR, CHN, XRD, DLS, and zeta potential techniques. Urea slow-release behavior, kinetics in water, and available Zn and N-forms leaching in the soil column were evaluated compared with conventional urea and zinc fertilizers. The pattern of release of urea in water was sigmoidal and after 12 h, only 20% of urea was released from fertilizers containing diatomite and HPMC. The NO3– release pattern in the soil started with a 12-day delay, and after that, the rate of NO3– leaching decreased by two to three times in the application of fertilizers containing HPMC compared with urea. The Zn concentration in the leachates of columns supplied with SRUFs was 35% less than for those supplied with ZnSO4. The results showed that the SRUFs make N and Zn available in the soil and but reduce the rate of their release.
Integrated intensities of the fundamental modes of vibrations of ammonium in heat-treated, NH4+-exchanged swelling minerals permits (1) a quantitative determination of the amount of tetrahedral substitutions of Si4+ by M3+ in dioctahedral smectites, and (2) an estimate of the degree of interlayer surface heterogeneity in trioctahedral minerals to be made. This is possible because NH4+ cations balancing the negative charge of tetrahedral sites that are not influenced by an excess positive charge of the octahedral layer have a symmetry lower (probably C3v) than the usual tetrahedral Td symmetry of NH4+. In C3v symmetry the ν1 band is infrared active whereas it is only Raman active in Td symmetry. Protons left after deammoniating dioctahedral smectites with tetrahedral substitutions form interlayer silanol groups, the stretching vibration of which give a band that is distinct from that of octahedral OH-stretching modes.
Naturally occurring ammonium illites have been discovered in black shales surrounding a stratiform base metal deposit in the DeLong Mountains, northern Alaska. Infrared spectra of the samples exhibit pronounced absorption at 1430 cm−1, the resonant-banding frequency for NH4+ coordinated in the illite interlayer. X-ray powder diffraction characteristics of the ammonium illites include an expanded d(001) spacing, with values as large as 10.16 Å, and ratios for I001/I003 and I002/I005 of about 2. Infrared analyses of physical mixtures of NH4Cl with a standard illite, and comparisons with synthetic ammonium micas indicate significant substitution (>50%) of NH4+ for K+ in the illite interlayer position. Nitrogen determinations on two ammonium illites after removal of carbonaceous matter gave values of 1.48 wt. % NH4+ and 1.44 wt. % NH4+. A survey of more than 150 different shale horizons indicates that the NH4+ content of the illites increases in proximity to the stratiform base metal mineralization.
Clinoptilolite from the Fort LaClede deposit in Sweetwater County, Wyoming, shows a moderate selectivity for NH4− over Na+ in aqueous solution. At 30°C, the standard free energy of this replacement reaction is −0.7 kcal/mole at an ionic strength of 0.05 M and −0.8 kcal/mole at 0.5 M. The Na+-NH4+ exchange is complete within 3 days in agitated solution and proceeds to the same extent from the clinoptilolite saturated with either cation.
The Ca2+-Na+ exchange also is complete within 3 days in agitated aqueous solution and proceeds to the same extent from either the calcium or the sodium form of the zeolite. Using test methods which take into account the slower equilibration of Ca2+-loaded clinoptilolite, the cation-exchange capacity is substantially the same over the full range of loading by Ca2+ and Na+. Ca2+ replaces Na+ with decreasing selectivity as Ca2+ loading increases to about 80% at 30°C (95% at 63°C), above which the selectivity reverses. The standard free energy of replacement of two Na+ ions by one Ca2+ ion in 0.05 M solution is −1.2 ± 0.2 kcal/mole at 63°C and −0.3 to −0.8 kcal/mole at 30°C.
The crystal growth of NH4-illite (NH4-I) from the hydrothermal system of Harghita Bãi (Eastern Carpathians) was deduced from the shapes of crystal thickness distributions (CTDs). The <2 mm and the <2-0.2 mm fractions of clay samples collected from the argillized andesite rocks consist of NH4-illite-smectite (I-S) interstratified structures (R1, R2, and R3-type ordering) with a variable smectite-layer content. The NH4-I-S (40-5% S) structures were identified underground in a hydrothermal breccia structure, whereas the K-I/NH4-I mixtures were found at the deepest level sampled (-110 m). The percentage of smectite interlayers generally decreases with increasing depth in the deposit. This decrease in smectite content is related to the increase in degree of fracturing in the breccia structure and corresponds to a general increase in mean illite crystal thickness. In order to determine the thickness distributions of NH4-I crystals (fundamental illite particles) which make up the NH4-I-S interstratified structures and the NH4-I/K-I mixtures, 27 samples were saturated with Li and aqueous solutions of PVP-10 to remove swelling and then were analyzed by X-ray diffraction. The profiles for the mean crystallite thickness (Tmean) and crystallite thickness distribution (CTD) of NH4-I crystallites were determined by the Bertaut-Warren-Averbach method using the MudMaster computer code. The Tmean of NH4-I from NH4-I-S samples ranges from 3.4 to 7.8 nm. The Tmean measured for the NH4-I/K-I mixture phase ranges from 7.8 nm to 11.7 nm (NH4-I) and from 12.1 to 24.7 nm (K-I).
The CTD shapes of NH4-I fundamental particles are asymptotic and lognormal, whereas illites from NH4-I/K-I mixtures have bimodal shapes related to the presence of two lognormal-like CTDs corresponding to NH4-I and K-I.
The crystal-growth mechanism for NH4-I samples was simulated using the Galoper code. Reaction pathways for NH4-I crystal nucleation and growth could be determined for each sample by plotting their CTD parameters on an α-ß2 diagram constructed using Galoper. This analysis shows that NH4-I crystals underwent simultaneous nucleation and growth, followed by surface-controlled growth without simultaneous nucleation.
Illite-smectite (I-S) minerals isolated from Upper Jurassic oil-source rock shales from Denmark and the North Sea have been investigated by X-ray diffraction, thermal analysis, infrared, Mössbauer, and solid-state nuclear magnetic resonance spectroscopies and chemical analysis. Detailed structures have been determined in order to reveal the diagenetic transformation mechanism in these shales. Generally, in oil-source rocks of sedimentary basins, oil generation takes place simultaneously with the diagenetic transformation of I-S. We demonstrate a link between the two reactions: NH3 released from kerogen during maximum oil generation is fixed as NH4+ in the NH4-bearing mica or tobelite layers formed from smectite or vermiculite layers in I-S, in a diagenetic interval which we name the ‘tobelitization window’. Due to this solid-state transformation, mixed-layer structures have been formed consisting of interstratified illite, tobelite, smectite and vermiculite layers (I-T-S-V) and having maximum ordering of illite + tobelite and smectite layers for R = 1. The tobelitization of smectite in I-S is probably typical for all oil-source rock shales.
The incorporation of boron (B) and nitrogen (N) into illite is the key demand-side process responsible for the diagenetic budget of these elements in sedimentary basins, with important implications for pore-water chemistry, natural-gas composition, and borehole geophysics. The purpose of the present study was to take advantage of recent advances in quantitative mineral analysis of sedimentary rocks which have opened new possibilities for investigating this particular process. In order to avoid complications with recycled (detrital) N and B, clays from pyroclastic horizons of sedimentary rocks (bentonites) were used. The B and N contents in illite-smectite were measured in samples from different sedimentary basins, representing a complete range of diagenetic alteration. The bulk-rock chemical measurements, performed on raw rock samples in order to avoid any loss of exchangeable B and N, were referred to the contents of illite-smectite clays and to the content of illite alone, both measured by a combination of XRD and chemistry-based techniques.
Both B and N (as NH4) are present in illite, so their contents in illite-smectite clay increase in a more or less linear manner with progressing illitization. Thus, during diagenesis, the illite-smectite clay is a net consumer of B and N from the pore water. The amount of N in individual illite layers decreases during diagenesis and the amount of B either decreases or remains stable. Bentonitic illite must acquire both B and N from outside of the bentonite bed. In one diagenetic cycle, bentonitic illite fixes up to 800–1000 ppm B and up to >1% N expressed as (NH4)2O, corresponding to >20% of the fixed cation sites.
Vermiculite is a common layered silicate clay mineral which has good adsorption and ion-exchange properties, and which is used to remove pollutants from groundwater. The adsorption by vermiculite from Heibei Province, China, of low-concentration ammonium in water was assessed here to evaluate the effects of adsorption time, particle size, adsorbent dose, pH, and temperature. Using Fourier-transform infrared spectroscopy, the concentration of NH4+ at 1430 cm−1 was evaluated after ammonium was adsorbed by vermiculite. Based on Langmuir-model analysis, the adsorption capacity of the Chinese vermiculite (in the particle-size range 0.025–0.075 mm) for ammonium was 18 mg/g after 3 h of equilibration. Optimal adsorption occurred at pH 6–7 and 60°C, which is different from that at high ammonium concentrations. Smaller particle-size fractions showed greater degrees of adsorption. Increase in Mg2+, K+, or Na+ concentrations influenced ammonium adsorption and, therefore, indicated that cation exchange was the mechanism for ammonium uptake from low-concentration solutions.
The presence of ammonium on Ceres was first speculated based on telescopic data in the 1990s. Subsequent data from Dawn unambiguously confirmed the presence on Ceres’s surface. Ammonium has been identified within near-ubiquitous dark materials, and in salts in few localized bright faculae in the interiors of craters as we describe further in this chapter.
The presence of ammonium on Ceres is significant because it implies the availability of ammonia during its evolution. More broadly, understanding the processes that led to the presence of ammonium on Ceres provides important information on the aqueous environments in the early Solar System and the origins and dynamical histories of the large outer main belt asteroids. We briefly review the significance of ammonia and then describe what was known or speculated about ammoniated species on Ceres before Dawn’s arrival. We then review findings of the Dawn mission, in particular the detection and mapping of ammoniated phases by the Visible and Infrared spectrometer (VIR): which species host ammonia/ammonium, their abundance, and spatial distribution. We then discuss the potential origins and implications of ammonia, drawing on laboratory studies and modeling efforts. Finally, we summarize the key findings and the outstanding questions that remain for future investigation.
For purposes of mass-rearing fruit flies, nutrient intake through artificial diets is a challenge, artificial food content and processing should promote sufficient absorption and availability to ensure fly fitness. Bulking agents play an essential role in creating a quality diet, but its physical characteristics, such as particle size, may establish a better microenvironment for feeding and development. Currently, there is a lack of information about protein metabolism in mass-reared fruit flies. Therefore, we evaluated whether the particle size of the bulking agent affects the absorption and excretion of the proteins, as well as their effect on the life-history traits of Anastrepha obliqua. We determined the protein content of hemolymph and feces, as well as the presence of nitrogen end-products as indicators of their level of absorption in a diet elaborated with coarse and fine corn cob particles as a bulking agent. The bromatological composition showed that coarse particles increased the bioavailability and content of crude, digestible, and soluble protein for the diet and hemolymph protein of larvae alike. We found an inverse relationship between the protein content of the hemolymph and feces of the larvae. Ammonium was determined to be a product of the catabolism of proteins. Also, A. obliqua improved its development (yield and pupal weight) and fitness (adult emergence and flight ability) when larvae were reared on a coarse particle diet. In conclusion, a diet elaborated with a coarse bulking agent features increased protein bioavailability and nutritional quality, which, in turn, increases the life-history traits of A. obliqua.
The crystal structures of (NH4)H2C6H5O7 and (NH4)3C6H5O7 have been determined using a combination of powder and single crystal techniques. The structure of (NH4)2HC6H5O7 has been determined previously by single crystal diffraction. All three structures were optimized using density functional techniques. The crystal structures are dominated by N-H⋅⋅⋅O hydrogen bonds, though O-H⋅⋅⋅O hydrogen bonds are also important. In (NH4)H2C6H5O7 very strong centrosymmetric charge-assisted O-H-O hydrogen bonds link one end of the citrate into chains along the b-axis. A more-normal O-H⋅⋅⋅O hydrogen bond links the other end of the citrate to the central ionized carboxyl group. In (NH4)2HC6H5O7, the very strong centrosymmetric O-H-O hydrogen bonds link the citrates into zig-zag chains along the b-axis. The citrates occupy layers parallel to the bc plane, and the ammonium ions link the layers through N-H⋅⋅⋅O hydrogen bonds. In (NH4)3C6H5O7, the hydroxyl group forms a hydrogen bond to a terminal carboxylate, and there is an extensive array of N-H⋅⋅⋅O hydrogen bonds. The energies of the density functional theory-optimized structures lead to a correlation between the energy of an N-H⋅⋅⋅O hydrogen bond and the Mulliken overlap population: E(N-H⋅⋅⋅O) (kcal/mole) = 23.1(overlap)½. Powder patterns of (NH4)H2C6H5O7 and (NH4)3C6H5O7 have been submitted to International Centre for Diffraction Data for inclusion in the powder diffraction file.
FTIR spectroscopy has been applied to NH4+-exchanged dioctahedral clay minerals to determine the molecular environment of NH4+ and to quantify N concentration. FTIR under vapourpressure control, coupled with heating and freezing treatments has shown that NH4+ ion symmetry varies with the nature of clay minerals. NH4+ has a perfect tetrahedral symmetry in hydrated or dehydrated smectites and belongs to the Td symmetry group. The NH4+-bending vibration is centred at 1450 and 1425 cm–1.
The Si4+-Al3+ substitution in dioctahedral clay minerals induces the loss of symmetry elements of the NH4+ tetrahedron which acquires a C2v symmetry. As a consequence, the Td –C2v transition can be used to characterize the smectite–illite transition. Quantification of NH4+ content per half unit cell is provided by nNH4 = k[NH4]/[OH] where [NH4]/[OH] is the band area ratio of the NH4+-bending vibration to the OH-stretching vibration. k = 1.1 for hydrated smectite, 0.9 for dehydrated smectite and 0.8 for illite or tobelite. The bending vibration of NH4+ is chosen for the calculation because it is not affected by superimposed contributions.
The evolution of the nitrogen and boron content of shales during diagenesis and anchimetamorphism was studied in the Carboniferous rocks of Donbas by means of the bulk rock chemical analysis and the XRD quantification of mineral composition, aided by CEC and EGME sorption measurements. The contributions of the organic-bound N and B were taken into account, based on the literature data (B) and on the relationship established in the course of this study (N). 28–98% of the total N and 80–100% of the total B are contained in the mineral fraction of the investigated shales.
The mineral nitrogen is located mostly in illite and accounts for 3 to 64% of the sites available for its fixation in 1Md illite. The fixation of N by illite seems to diminish in the course of diagenesis, but additional fixation occurs in newly formed 2M1 illite during the anchimetamorphic stage. The volume of N contained in illite in most samples greatly surpasses the N available locally from the organic matter contained in shale. Modelling indicates that the measured level of N for K substitution in illite corresponds to the capture in 30 vol.% of shale of all N released in a basin containing 5 vol.% of coal.
Boron is held predominantly by the 1Md fraction (illite+smectite). During diagenesis boron is redistributed into the 1Md illite, and during anchimetamorphism it is released from the 1Md illite and incorporated into new 2M1 illite. No indication of the net enrichment of pore water in B due to the clay alteration process was found.
The percolation of water through waste landfill sites produces leachates with large amounts of pollutants. Clay barriers are often used to limit soil and underground water pollution. A better understanding of the interaction between ammonium smectite and carboxylic acids would contribute significantly to our understanding of such systems. The SWy-2 (Wyoming smectite) was exchanged with NH4+ and then batched with carboxylic acids (acetic, formic, chloroacetic and oxalic) in concentrations between 0.01 M and 1 M. The solid phases obtained were analysed chemically and characterized by infrared absorption spectroscopy (IR) and powder X-ray diffraction (XRD). Ionic chromatography was used for the quantitative measurement of ammonium ions in the solution after the interaction. For the four acids, the interaction was characterized by a cationic exchange of NH4+ to H3O+. A partial exchange to Al3+ due to a partial dissolution of the sample in strong acidic medium was observed with chloroacetic and oxalic acids for which adsorption of molecules on the clay sample occurs, mainly through H-bonding with the cation. Moreover, the intercalation of oxalic acid in the interlayer space was highlighted.
Ammonium analyses of representative rocks from the Rosses granite complex (Ireland) and their constituent mineral show that any variation of magmatic origin has been completely obscured by pervasive hydrothermal alteration. The altered rocks are strongly enriched in the ammonium ion, most of which is held by chloritized biotite and sericitized plagioclase. The present ammonium content of the Rosses granites averages 13 ppm, but the original ammonium content of the magmas is estimated to have been less than 5 ppm. Potassium feldspars may preserve a better record of the original magmatic ammonium content than the whole rocks or the biotites.