The inverse dynamics model of an industrial robot can predict and control the robot’s motion and torque output, improving its motion accuracy, efficiency, and adaptability. However, the existing inverse rigid body dynamics models still have some unmodelled residuals, and their calculation results differ significantly from the actual industrial robot conditions. The bootstrap aggregating (bagging) algorithm is combined with a long short-term memory network, the linear layer is introduced as the network optimization layer, and a compensation method of hybrid inverse dynamics model for robots based on the BLL residual prediction algorithm is proposed to meet the above needs. The BLL residual prediction algorithm framework is presented. Based on the rigid body inverse dynamics of the Newton–Euler method, the BLL residual prediction network is used to perform error compensation on the inverse dynamics model of the Franka robot. The experimental results show that the hybrid inverse dynamics model based on the BLL residual prediction algorithm can reduce the average residuals of the robot joint torque from 0.5651 N·m to 0.1096 N·m, which improves the accuracy of the inverse dynamics model compared with those of the rigid body inverse dynamics model. This study lays the foundation for performing more accurate operation tasks using industrial robots.

A more intuitive appreciation of spatial compliant behavior can be obtained through analysis and description of the behavior in terms of its centers, specifically the center of stiffness, the center of compliance, and the center of elasticity. This paper investigates the properties of each of these centers. Necessary and sufficient conditions for the coincidence of these centers are identified. A physical appreciation of those compliant behaviors that have coincident centers is obtained in terms of restrictions on the geometry of topologically simple mechanisms that realize those behaviors. The results can be used in the design of compliant mechanisms for robotic manipulation, especially when the compliance is characterized by the location of its center.

This paper proposes a seat support mechanism to solve the problem of misalignment between the chest examination and probe scanning areas when the patient is bent in a seated-style echocardiography robot. To guide the patient to an appropriate body position where their chest is within the examination range of the chest examination unit while minimizing the physical load of the patient, the posture of the patient must satisfy the three following conditions. (i) The breech must be in contact with the seat surface, (ii) the legs must be vertical to the floor, and (iii) the chest and mechanism must be parallel while the probe scanning and chest examination ranges must match. The human body was modeled to derive a posture that satisfies the aforementioned conditions for the height of each individual, and a seat support mechanism with four degrees of freedom was installed to guide the user to the derived posture. By installing this mechanism, the body load of the left biceps brachii, right biceps brachii, left latissimus dorsi, and right latissimus dorsi was reduced to 64.7%, 52.7%, 86.4%, and 80.2%, respectively. The sharpness of the image contours was improved to 103.8%.

Traditional path planning algorithms often encounter challenges in complex dynamic environments, including local optima, excessive path lengths, and inadequate dynamic obstacle avoidance. Thus, the development of innovative path planning algorithms is essential. This article addresses the challenges of mobile robot path planning in complex environments, where traditional methods often converge to local optima, leading to suboptimal path lengths, and struggle with dynamic obstacle avoidance. To overcome these limitations, we propose an integrated algorithm, the enhanced sparrow search algorithm combined with the dynamic window approach (ESSA-DWA). The algorithm first utilizes ESSA for global path planning, followed by local path planning facilitated by the DWA. Specifically, ESSA incorporates Tent chaotic initialization to enhance population diversity, effectively mitigating the risk of premature convergence to local optima. Moreover, dynamic adjustments to the inertia weight during the search process enable an adaptive balance between exploration and exploitation. The integration of a local search strategy further refines individual updates, thereby improving local search performance. To enhance path smoothness, the Floyd algorithm is employed for path optimization, ensuring a more continuous trajectory. Finally, the combination of ESSA and DWA uses key nodes from the global path generated by ESSA as reference points for the local planning process of DWA. This approach ensures that the local path closely follows the global path while also enabling real-time dynamic obstacle detection and avoidance. The effectiveness of the algorithm has been validated through both simulations and practical experiments, offering an efficient and viable solution to the path planning problem.

The lower limb exoskeleton is a typical wearable robot designed to assist human motion. However, its system stability and performance are often compromised due to unknown model parameters and inadequate control strategies. Therefore, it is crucial to explore the parametric identification of the exoskeleton and the design of corresponding control strategies for human-exoskeleton cooperative motion. First, an exoskeleton platform is developed to provide experimental validation. Simultaneously, a two-degree-of-freedom (2-DOF) exoskeleton model is constructed using the Lagrange method. The neighborhood field optimization (NFO) technique is then applied to identify the unknown model parameters of the exoskeleton. Additionally, the excitation trajectories for the exoskeleton are developed by the NFO method, incorporating several motion constraints to enhance the accuracy of model identification. An admittance controller is implemented to enable active control of the exoskeleton, allowing it to align with human intention and thereby improving the wearability and comfort of the device. Finally, both simulation and experimental results are compared and verified on the platform. These results demonstrate that the NFO method achieves superior identification accuracy compared to particle swarm optimization (PSO) and genetic algorithm (GA).

An improved identification algorithm is adopted to calibrate the kinematic parameters of the serial-parallel robot, which improves the motion accuracy of the end-effector. Firstly, a kinematic model of the serial-parallel robot is constructed based on the closed-loop vector method. Secondly, a kinematic error model is established by combining geometric error analysis with the vector differential method. Then, with the effective separation of compensable and non-compensable error sources, an identification model of kinematic parameters is constructed. Finally, an improved pivot element weighted iterative algorithm is used to identify the geometric error parameters. Through actual pose measurement, MATLAB is used to simulate the calibration process. The simulation and experimental results show that after kinematic calibration, compared with the traditional least squares method, the improved identification algorithm can significantly reduce the end-effector pose error of the serial-parallel robot, thus effectively improving the motion accuracy of the end-effector.

Interfacial interactions, including adhesion and friction, directly affect the ability of the robot system to interact with the external environment, such as the realization of operation and motion functions. Bionics provides guidance for the active control of interface forces. Creatures such as geckos, tree frogs, octopuses, and beetles have developed delicate topological structures and smart control strategies during long-term evolution, facilitating their ability to adhere to, manipulate, capture, and traverse various surfaces across diverse environments. Inspired by the advantages of high strength, adaptability, controllability, durability, and no residue, biomimetic controllable adhesion structures, materials, and systems have been developed, showing a wide range of potential applications in reversible attachment, flexible locomotion, and dexterous grasping. In this paper, the mechanisms and theoretical models of various biological reversible adhesion systems in nature are summarized. Then the design criteria, optimization method, and preparation technology of the artificial adhesion structures based on van der Waals interaction, capillary force, negative pressure, and mechanical interlocking mechanisms are reviewed. In particular, the adhesion/load ratio and the switch ratio of adhesive materials and structures are highlighted to evaluate the adhesion ability and controllability of various designs. The applications of biomimetic controllable adhesion structures and systems in robotics manipulation and locomotion are presented. Finally, the conclusion and possible future direction are discussed.

Global path planning using roadmap (RM) path-planning methods including Voronoi diagram (VD), rapidly exploring random trees (RRT), and probabilistic roadmap (PRM) has gained popularity over the years in robotics. These global path-planning methods are usually combined with other path-planning techniques to achieve collision-free robot control to a specified destination. However, it is unclear which of these methods is the best choice to compute the efficient path in terms of path length, computation time, path safety, and consistency of path computation. This article reviewed and adopted a comparative research methodology to perform a comparative analysis to determine the efficiency of these methods in terms of path optimality, safety, consistency, and computation time. A hundred maps of different complexities with obstacle occupancy rates ranging from 50.95% to 78.42% were used to evaluate the performance of the RM path-planning methods. Each method demonstrated unique strengths and limitations. The study provides critical insights into their relative performance, highlighting application-specific recommendations for selecting the most suitable RM method. These findings contribute to advancing robot path-planning techniques by offering a detailed evaluation of widely adopted methods.

Soft robots have emerged as a transformative technology with widespread applications across diverse fields. Among various actuation mechanisms, fluid-based actuation remains predominant in soft robotics, where precise fluid regulation is fundamental to system performance. This review aims to provide a comprehensive reference for researchers interested in fluid regulation strategies in soft robots by outlining the current state of research in this field and discussing innovations in valve designs to inspire future advancements. The fluid regulation strategies discussed in this review are systematically categorized into three main approaches: valve-based, smart fluid-based, and pressure source-based strategies, with each type systematically classified and discussed in detail. Building upon this analysis, a Task-to-Fluidic Regulation System mapping framework is proposed, integrating the V-model principles from systems engineering to provide a structured, requirements-driven methodology that links task objectives to concrete regulation system configurations through sequential design and multi-level verification. Finally, the latest advancements in fluid regulation methods in soft robotics are summarized, along with emerging trends and directions for future development.

Robotic lower limb exoskeletons are wearable devices designed to augment human motor functions and enhance physical capabilities mostly adopted in healthcare and rehabilitation. The field is strongly dominated by rigid exoskeletons driven by electromagnetic actuators constituted by electrical motors, gearboxes, and cylinders. This review focuses on the design and specifications of the actuation systems of lower limb exoskeletons, with the ultimate goal of providing reporting guidelines to allow for full reproducibility. For each paper, we assessed the quality and completeness of technical characteristics with two ad hoc rating scales for motors and reducers; we extracted the main parameters of the actuation unit and a quantitative analysis of the mechanical characteristics of the individual components was carried out considering the exoskeleton application. Overall, we observed a lack of details in reporting on actuation systems equipped on exoskeletons. To overcome this limitation, herein we conclude by proposing a data form and a checklist to provide researchers with a common approach in reporting the mechanical characteristics of the actuation unit of their lower limb exoskeletons. We believe that the convergence of exoskeletons’ literature toward a clearer standardization of design and reporting will boost the development of this technology and its diffusion outside the laboratory.

Pipelines are used in many sectors to transport materials such as fluid from one place to another. These pipelines require regular inspection and maintenance to ensure proper operations and to avoid accidents. Many in-pipe navigation robots have been developed to perform the inspection. Soft in-pipe navigation robot is a special class of in-pipe robot, where the structure is made entirely of soft materials. The soft in-pipe robots are cheaper, lightweight, robust, and more adaptable to the environment inside pipelines as compared to the traditional rigid in-pipe navigation robot. This paper reviews the design of different types of soft in-pipe navigation in terms of the material, structure, locomotion strategy, and actuation techniques. These four different aspects of the design help researchers to narrow down their research and explore different opportunities within each of the design aspects. This paper also offers suggestions on the direction of research to improve the current soft in-pipe navigation robot design.