To save content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about saving content to .
To save content items to your Kindle, first ensure no-reply@cambridge.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
We examine the onset of wave breaking in highly viscous gravity-driven vertical falling liquid films in a quiescent atmosphere via multiphase direct numerical simulations. Both Newtonian and Herschel–Bulkley liquids are considered. Analysis of the force balance acting on wave humps shows that the transition from travelling waves to breaking states is governed primarily by the competition between gravitational and capillary forces. The transition is primarily characterised by a criterion based on the Eötvös number (quantifying gravitational to capillary forces), which we identify through a comprehensive parameter study involving over 500 simulations, where we vary the Reynolds number, the plasticity number and the power-law index. We provide a regression model for $\textit{Eo}_{\textit{crit}}$ in terms of these parameters, as well as for the corresponding wetting rate. The parameter study indicates that breaking generally occurs for large film thicknesses and high viscosities, yielding large Eötvös numbers while remaining in the wavy–laminar flow regime. Close to the onset of breaking, we observe overhanging travelling wave solutions, where the wave front deforms into a steady overhang, and this state generally precedes wave breaking irrespective of the investigated rheologies. Our results establish a concise criterion for predicting wave breaking in falling films involving both Newtonian and complex fluids representative of different industrial processes, and have implications for heat and mass transfer, bubble entrainment and liquid residence time.
We present a theory for the hydrodynamic forces in the drainage of an electrolyte film confined between charged curved surfaces, which applies to small gaps under local equilibrium across the film thickness. We derive a local Onsager formalism describing the coupled flow rate, charge and solute fluxes, which accounts for all degrees of overlap of the electrical double layers (EDLs) and can be adapted to a variety of electrical, chemical or hydrodynamic boundary conditions. We explore in detail the case of a monovalent electrolyte with constant surface charge and no-slip boundary conditions. A complete phase diagram is established for the electro–kinetic damping, including non-overlapping EDLs at both high and low Dukhin numbers, as well as all degrees of EDLs overlap including the Gouy–Chapman, Debye–Hückel and ideal-gas domains. We highlight a simple relation between the apparent hydrodynamic distance at high Dukhin number and the surface electrical conductance. Our theory also predicts a diffusio–kinetic contribution to the so-called electroviscous effect, which does not reduce to a damping but exhibits a conservative (stiffness) component. We show that this stiffness decays as an algebraic function of the gap between the surfaces and may dominate the stiffness due to the equilibrium Derjaguin–Landau–Verwey–Overbeek interaction force.
Radially spreading extensional flows can become unstable and develop tearing patterns consisting of rifts and tongues. Such patterns have been observed in laboratory experiments with strain-rate-softening (shear-thinning) polymer solutions and in spreading ice shelves. Linear stability analysis predicts that axisymmetric spreading of power-law fluids becomes unstable when the fluid is shear thinning. However, understanding the emergence and evolution of rifts requires analysis of the nonlinear flow regime. In Part 1 of this study we developed a numerical simulation of the full nonlinear equations and showed that Newtonian fluids remain globally stable, consistently with theoretical predictions and experimental observations. Here we extend that framework to explore power-law fluids. We demonstrate that purely viscous shear-thinning fluids can develop rifts, and evolve rift-tongue patterns consistently with theoretical and experimental findings. Starting from an axisymmetric base state, we examine the resulting flow under monochromatic perturbations over a range of amplitudes, wavenumbers, fluid properties, and boundary and initial conditions. We find that for shear-thinning fluids, rift formation depends strongly on perturbation amplitude, while being less sensitive to the perturbation wavenumber. The mechanism reflects competition between a destabilising radial force associated with hoop stresses and a stabilising force arising from radial normal-stress divergence. As the fluid gets more shear thinning, the stabilising contribution weakens, facilitating rift formation. These results provide new insights into the nonlinear mechanisms governing rift formation in polymer solutions and in spreading ice shelves.
We consider the thin-film flow of a free-surface fluid surrounding a two-dimensional elliptical substrate. The effects of shear, surface tension, mass injection and varying substrate curvature on the dynamics are modelled in a combined analysis of steady states, linear stability theory and general time-evolution simulations. We discover a symmetry-breaking instability in which the combined effect of surface tension and shear can transport fluid in a direction perpendicular to the shear flow when the elliptical curvature variation is sufficiently large. Symmetric steady solutions are shown to be linearly unstable to asymmetric temporal perturbations, and the resultant instability involves a breaking of symmetry of the fluid surface that arises from the competing effects of shear, surface tension and varying substrate curvature. Our work forms fundamental understanding of and a theoretical basis for further investigations into this symmetry-breaking instability.
Aircraft icing poses a critical threat to aviation safety in cold climates, with the dynamic glaze ice accretion process governed by the transient behaviour of wind-driven runback water film and rivulet (WDRWF/R) flows on wing surfaces. Despite its significance, accurately modelling this complex multiphase flow phenomenon remains a fundamental challenge for conventional numerical and theoretical approaches. This study introduces a physics-guided Fourier neural operator (PGFNO) that achieves unprecedented accuracy in predicting the spatiotemporal evolution of WDRWF/R flows relevant to aircraft icing. To establish a high-fidelity training dataset, we conducted an extensive experimental campaign utilising a novel digital image projection (DIP) technique, which enables temporally and spatially resolved measurements of water film thickness distributions over a flat plate under diverse operating conditions. The PGFNO architecture incorporates a composite loss function that enforces physical constraints, ensuring both accurate field reconstruction and mass conservation. The trained model demonstrates robust predictive capability across a wide range of flow conditions, including extrapolation to unseen wind speeds, water flow rates and initial conditions, while accurately capturing both the film thickness field and its spectral characteristics. A comprehensive ablation study systematically evaluates the contributions of key architectural components to model performance, including the physics-guided loss function, embedding-layer configuration and Fourier mode/block selection. Long-term predictions via recurrent forecasting achieve errors approaching the experimental uncertainty of DIP measurements, while robustness tests with spatially distributed random noise confirm exceptional model stability. These results establish PGFNO as a powerful predictive framework for complex multiphase flows, with direct implications for aircraft icing prediction and mitigation strategies.
This paper investigates the temporal, spatiotemporal and nonlinear instability of a weakly viscoelastic liquid film flowing down a vertical cylindrical fibre. The fluid is described by the Walters’ liquid B model, and the analysis combines long-wave asymptotic modelling, a long-wave-weighted Orr–Sommerfeld stability analysis and nonlinear numerical simulations. Linear stability analysis reveals that while viscoelasticity is temporally destabilising, it significantly expands the domain of absolute instability in parameter space, facilitating the upstream propagation of disturbances. In the nonlinear regime, viscoelasticity exhibits a distinct dual effect: it monotonically suppresses the saturation amplitude $r_{\textit{max}}$ with increasing elasticity $M$, whilst accelerating the onset of finite-time singularity during rupture dominated by absolute instability at larger elasticity parameters. The rupture dynamics obeys a self-similar scaling $h_{\textit{min}} \sim (t_c - t)^m$. Driven by gravity-induced axial stretching, the system deviates from classical pure-capillary pinch-off, shifting the Newtonian baseline to a friction-dominated drainage regime with $m \approx 0.50$ and an asymmetric spatial collapse. Based on this gravitationally modified baseline, increased elasticity further reduces the temporal exponent $m$, indicating that elastic effects accelerate the local thinning dynamics while preserving the main upstream similarity structure. Travelling-wave solutions further reveal elasticity-induced changes in the phase-space topology of the saturated states: in the solitary-wave regime, increasing elasticity promotes a transition from near-homoclinic trajectories to stable limit cycles, whereas in the parasitic-wave regime it produces more complex homoclinic-like trajectories associated with satellite droplets in physical space.
We explore thermo-viscous instabilities in an idealised setting motivated by ice-sheet flow, modelled as a shallow layer of fluid with a temperature-dependent viscosity flowing down an inclined plane and subject to a constant geothermal heat flux. In this setting, multiple steady states are possible for a given slope, and we examine their linear stability to general wave-like perturbations in both the streamwise and transverse directions. We confirm that the lower and upper branches are stable with respect to perturbations that are spatially uniform in the two horizontal directions, but the intermediate state is unstable. For finite-wavenumber perturbations and with heat diffusion into the underlying bedrock, we find that all three branches are unstable. The lower and upper branches exhibit a relatively weak instability with respect to waves with finite streamwise wavelength and long transverse wavelengths, caused by diffusion of heat into the bedrock. Across all branches, the strongest instability occurs when the transverse wavelength is infinite and streamwise wavelengths are order one. Along the intermediate branch, modes remain unstable for all transverse wavenumbers, and growth rates do not decay in the limit of short transverse wavelengths. Motivated by this observation, we also briefly examine a simplified nonlinear problem for transverse perturbations, in order to clarify the implications of this missing short-wavelength cutoff.
Analysing the dynamics of phase-changing liquid films is essential for enhancing the performance of thermal-management systems. Still, direct simulation of the full governing equations is computationally expensive. To circumvent this limitation, I derived a weighted-integral boundary-layer (WIBL) model under long-wave assumptions, weak evaporation and strong surface tension, also accounting for variable-substrate heating. In the linear regime, the WIBL reproduces the growth rates and cutoff wavenumbers of unstable modes with significantly higher accuracy than commonly used Benney-type models for Reynolds number ${{\textit{Re}}}\lt 40$, and with accuracy comparable to that of the Orr–Sommerfeld equations. The linear analysis further reveals a threshold separating streamwise- and spanwise-dominated instabilities in hanging films, arising from the competition between the Kapitza and Rayleigh–Taylor mechanisms; the WIBL accurately predicts this threshold for small ${\textit{Re}}$ and inclination angles. In the nonlinear regime, with space- and time-varying substrate heating, the WIBL model captures the evolution of the free-surface thickness and temperature with an accuracy of approximately 6 % relative to the original Navier–Stokes equations. Three-dimensional simulations show that a condensing film undergoes dry out due to Kapitza instability, whereas unsteady substrate heating promotes spanwise momentum spreading, modifies wave dynamics, and prevents dry out. The WIBL model provides a good level of accuracy at a low computational cost, enabling extensive parametric studies, nonlinear-stability analyses and the design of optimal substrate-heating control strategies.
Stalagmites grow from the repeated impact of supersaturated water drops onto a cave floor. Existing theoretical descriptions typically model the water supply as a continuous thin film driven by a steady flux. Consequently, they neglect the discrete nature of individual drops and fail to predict a non-zero minimal stalagmite radius. Here, we demonstrate that the coupled hydrodynamics and precipitation kinetics of a single drop spreading as a thin viscous film on a stalagmite tip select a specific minimal radius. Using the similarity solution for an axisymmetric gravity current of fixed volume, coupled with precipitation kinetics, we derive an explicit expression for this lower bound in terms of drop volume, fluid properties and reaction rate. For typical cave parameters, the predicted radius is of the order of two centimetres, in quantitative agreement with the smallest stalagmites observed in the field. Our results provide a falsifiable constraint on stalagmite morphodynamics and offer a prototype for scale selection in reactive gravity currents generated by discrete sources.
Using a long-wave analysis, buckling under compression is explored for a thin film of viscous fluid floating above a deep, less viscous bath. Buckling competes against buoyancy and bending stress in this problem, leading to a preferred wavelength in linear theory. Nonlinearity arrests the growth of such unstable modes, slowing amplification from the initially exponential growth to a long-term algebraic growth. When multiple buckling modes are present, the nonlinearity of the thin-film model leads to an exact closure in which only those wavelengths remain excited. Moreover, the suppression of the longest waves by buoyancy triggers a direct cascade in which mode coupling gradually transfers excess length from the gravest modes to higher wavenumber. Buckling patterns then inexorably decrease in wavelength until the mode with the shortest wavelength is reached. The dynamics of this nonlinear cascade is interrogated in detail and its temporal control is deciphered. The analogous dynamics for a thin film of power-law fluid is discussed. In this case, nonlinear effects are more complicated owing to the nonlinearity present in the viscosity law.
Transport phenomena at liquid–gas interfaces remain not fully understood, particularly due to creating reproducible surfaces to quantify intrinsic slip and enhanced mass transport. Here we measure ionic diffusion currents across a bubble liquid film bounded by solid–liquid–gas interfaces under controlled salt gradients and surfactant concentrations. Ionic surfactant adsorption significantly increases the diffusion current, which peaks at $10^{-1}$ mM and decreases at higher concentrations. We attribute this non-monotonic behaviour to two competing effects: increased surface charge density and reduced slip length induced by surfactant adsorption. We develop an analytical theory for diffusion currents with slip boundaries, enabling extraction of the effective surface charge density and intrinsic slip length as functions of surfactant concentration. The effective slip length remains ${\sim}3\,{\unicode[Arial]{x03BC}} \mathrm{m}$ below a critical surfactant concentration but drops sharply above $10^{-2}$ mM. These results establish a quantitative framework for slip-enhanced electrokinetic transport at surfactant-covered liquid–gas interfaces.
Stalagmites in karstic caves preserve valuable palaeoclimate records through calcium-rich layered deposits, presenting curvature variations both across and within individual stalagmites. Stalagmites always remain covered by a thin water film fed by a discrete inflow of drops, which bring in new ions in solution for the stalagmites to grow. However, the gravity-induced drainage of this film and its response to the underlying stalagmite shape and the discrete drop inflow remain poorly characterised in existing growth models. To address these limitations, we develop a theoretical framework that captures the combined effects of shape curvature and discrete drop inflow on thin film drainage dynamics, starting from Reynolds lubrication theory expressed in curvilinear coordinates. From there, we show that the limiting cases of thickness-dominated and inclination-dominated drainage translate into distinct scaling laws for both the front propagation position and stationary film thickness. We further illustrate these regimes and assess the corresponding scaling laws by numerically solving the governing equations. Finally, experimental measurements conducted in both cave and laboratory settings confirm the predicted stationary film thickness. Our findings provide insights into the influence of substrate shape and inflow dynamics on thin film drainage, with implications for stalagmite growth modelling and other gravity-driven surface flows.
The coffee-ring effect is a universal feature of evaporating sessile droplets with a pinned contact line, wherein solutes or particles are advected to the droplet’s edge due to evaporation-driven flows. Here, we investigate model respiratory droplets primarily composed of water, salt and a type of the glycoprotein mucin. Using fluorescence microscopy, we observe the formation of a well-defined protein ring at the droplet edge as water evaporates. The growth and morphology of this ring exhibit a strong dependence on ambient relative humidity ($H_r$), revealing a dynamics that existing models cannot capture. While existing models have successfully described the formation of the coffee ring in particle-laden droplets, they often assume that the evaporative flux, and thus the hydrodynamics, is decoupled from solute transport. This assumption breaks down in complex fluids, such as protein or polymeric solutions, where the solute can influence evaporation through changes in water activity. Specifically, we find that protein accumulation at the edge is governed by the feedback between local solute concentration and evaporation rate. To account for this, we develop a minimal theoretical model based on the lubrication approximation, incorporating the coupling between the hydrodynamics and solute transport through the evaporation rate. Our framework reproduces key features of the experimental observations and suggests a physical basis for the $H_r$-dependent stability and infectivity of respiratory droplets containing viruses.
The linear stability of a viscoelastic liquid film containing insoluble surfactant on a horizontal quasi-periodic oscillating plane for disturbances with arbitrary wavenumbers is investigated. The combined effects of viscoelasticity and quasi-periodic oscillation on the instability mechanism in the presence of surfactant are described with the Floquet theory. For long-wavelength instability, the solution in the limit of long-wave perturbations is obtained by the asymptotic expansion method. The results indicate that, in the absence of gravity, the stability of the oscillating film is determined by the competition between viscoelastic and surfactant effects. In the presence of gravity, the U-shaped neutral curves with separation bandwidth appear. Due to the existence of viscoelasticity, the effects of different frequency ratios and amplitude ratios on the U-shaped neutral curve in the high-frequency region are significantly different from the results under Newtonian fluids. Furthermore, whether gravity exists or not, the viscoelastic effect exhibits a dual effect of initially destabilising, subsequently stabilising and finally destabilising again in the high-frequency oscillating liquid film. The finite-wavelength instability is solved numerically based on the Chebyshev spectral collocation method. The study demonstrates that viscoelasticity results in a non-monotonic trend in the critical Reynolds number of finite-wavelength modes. In the high-frequency region, a bifurcation phenomenon appears due to competition between different standing-wave modes. Increasing the viscoelastic parameter, frequency ratio or amplitude ratio significantly destabilises the flow under high-frequency oscillations.
Droplet evaporation on a mesa, a raised region with a flat top, occurs in spray coating, microreactors and printed-electronics fabrication. In printed-electronics fabrication, maintaining a pinned contact line is often desirable, and depositing droplets on wide and short mesas offers a simple and effective way to achieve this. We combine flow-visualisation experiments with mathematical modelling to systematically characterise contact-line motion on mesas having heights much smaller than their widths. Flow visualisation reveals that the contact line pins at the mesa edge for a significant amount of time, with lower heating temperatures or larger initial liquid volumes further prolonging this pinning. To interpret these trends, we construct a lubrication-theory-based model that employs a precursor-film/disjoining-pressure approach to account for contact-line motion and a one-sided framework to describe evaporation. Numerical solutions reveal that higher heating temperatures enhance evaporation near the droplet edge, leading to shorter pinning times, while larger initial liquid volumes induce more convex interfaces and stronger outward flows, which extend the pinning. Our model qualitatively explains the experimental trends and suggests strategies for controlling droplet pinning in printed-electronics fabrication.
Electrohydrodynamic (EHD) instabilities at the free deformable surface of thin nematic liquid crystal (NLC) films can generate large-area, self-organised, multi-scale surface morphologies under an external electrostatic field. In this work, we present a comprehensive investigation of EHD patterning in thin NLC films combining continuum-scale nonlinear simulations (NS) and molecular dynamics (MD). The multi-scale analysis identifies three principal morphological pathways: (i) no-patterning mode, observed at low electric fields; (ii) columnar mode, emerging above a critical field; and (iii) coalescence mode, characterised by lateral merging of patterns at higher field strengths. The NS further unveil two distinct pathways of the columnar mode – the secondary structure mode (SSM), exhibiting primary columns with secondary droplets; and the primary structure mode, featuring uniformly spaced primary columns. The SSM is favoured at low air-to-NLC filling ratios, where the additional elastic energy requirement to sustain anisotropic interfacial anchoring enhances surface deformation, forming multi-scale morphologies. The MD simulations additionally reveal a fundamental thermodynamic basis of EHD instability, dictating the patterning of NLC. The evolution, transition and tunability of these morphologies are governed by a complex interplay of field strength, filling ratio, anchoring anisotropy, elasticity and dielectric anisotropy. Parametric studies across this design space further offer strategies for tuning the prominence of secondary structures and arresting coalescence. The NS and MD simulations collectively reveal a bimodal orientational anisotropy, demonstrating the pattern’s function as a self-assembled photomask. These findings reveal the rich morphological diversity and surface functionality of NLC films, with promising applications in photolithography, electro-optic devices and adhesive systems.
It is well-known that viscoelasticity plays a stabilising role in thin liquid film flow at moderate Reynolds numbers, which, however, cannot be resolved by current long-wave models. All these long-wave models can only predict the destabilising effect of viscoelasticity. This paper proposes a novel integral boundary layer model for a two-dimensional Oldroyd-B liquid film flow down a vertical plane. It consists of four dynamical variables – the film thickness $h$, local flow rate $q$, depth-integral normal viscoelastic stress $A$, and depth-integral shear viscoelastic stress $B$ – which successfully capture the destabilising mechanism of viscoelasticity at small Reynolds numbers and the stabilising mechanism of viscoelasticity at moderate Reynolds numbers by a linear stability analysis. Energy budget analysis reveals that the overall effect of viscoelasticity results from competition between destabilising surface shear stress and stabilising total polymeric stress work. Nonlinear travelling wave analysis reveals that wave speed is enhanced by weak viscoelasticity but suppressed by strong viscoelasticity, while the maximum film thickness grows monotonically with viscoelasticity at low Reynolds numbers, displaying a non-monotonic response characterised by an initial increase followed by a subsequent decrease under moderate Reynolds number conditions. Direct numerical simulations show that our integral boundary layer model is remarkably accurate when the Reynolds number is moderate, which predicts the nonlinear wave speed within $2\,\%$ errors against the full Navier–Stokes equations.
The stability of a horizontally oscillating liquid film under sidewall confinement is investigated through a bi-global Floquet analysis. The classical two-dimensional oscillating liquid film is extended to a three-dimensional configuration with oscillating sidewalls. This framework resolves the high-dimensional eigenvalue problem arising from the spatio-temporal coupling in this three-dimensional system. For long-wave instabilities, a semi-analytical asymptotic approach is adapted to capture the growth rates efficiently, while the arbitrary-wavelength instabilities are solved via Chebyshev spectral collocation methods. The asymptotic and numerical results reveal that the sidewalls suppress both long-wave and finite-wavelength instabilities by contracting the unstable frequency range and elevating the critical Reynolds numbers. Besides, two distinct instability modes are identified: a long-wave mode dominated by surface shear stress, and a finite-wavelength mode driven by Reynolds stress. Energy budget analysis confirms that sidewalls stabilise the flow by dampening energy production. This work provides fundamental insights into controlling oscillating film instabilities through geometric confinement.
We investigate the effect of a high concentration (32.5 $\mathrm{g\,L}^{-1}$) of sodium chloride (NaCl) on tetradecyltrimethylammonium bromide vertical soap films, also called foam films, pulled out of a bath under controlled humidity conditions. We observe that the film lifetime increases with relative humidity, both in the presence and absence of salt. At any given humidity, the presence of NaCl systematically enhances film stability. Our film thickness measurements show that the thinning dynamics with or without salt is nearly identical down to 100 nm. Down to that thickness, the effect of evaporation can be rationalised by a constant evaporation rate, which becomes non-negligible compared with the drainage rate at film thicknesses below 400 nm. The main effect of salt is the stabilisation of a Newton black film at a thickness of approximately 5 nm, whereas in the absence of salt, the film ruptures upon reaching a critical thickness of approximately 10 nm.
Drop deformation and motion driven by shear flows are widespread phenomena in nature and underpin a variety of technological applications. We investigate the deformation, motion and contact-line dynamics of two-dimensional drops in steady shear flows within the framework of lubrication theory. For pinned drops with $180^\circ$ hysteresis, we identify a critical shear rate, beyond which the upstream side becomes unstable and a thinning film develops. At late stage, the thinning film connects to the bulk drop through a self-similar capillary transition structure. For moving drops with $0^\circ$ hysteresis, the dynamical behaviours can be classified into three regions: in the low-shear region, the steady-state drop velocity increases linearly with the shear number $S$; in the intermediate-shear region, the drop velocity exhibits a non-monotonic dependence on $S$; in the high-shear region, the steady-state drop profile can be clearly divided into the entrained film, dimple and capillary ridge. Moreover, during the drop evolution under high shear, a Landau–Levich–Derjaguin-like (LLD-like) film emerges and exhibits a scaling law that differs from the classical LLD law. These results provide a unified theoretical and numerical framework for understanding shear-driven drop dynamics and may offer insights into analogous three-dimensional systems.